Hisense Refrigerator
Shelf in refrigerator chamber
There are three glass shelves in
refrigerator chamber. They can be
adjusted to various heights as needed.
When you remove the shelves,
gently pull them forward until the
shelf comes clear of the shelf
guides.
When you re-install the shelves,
make sure there is no obstacle
behind and gently push the shelf
back into the position.
All the door racks and covers are
completely removable for cleaning.
Bottle rack
Crispers
The crisper, mounted on telescopic
extension slides, is for storing
vegetables and fruits.
When you remove the crispers, pull
them forward, then separate the
crisper from the slides. Remember to
empty food in the crisper first. Once
you have removed the drawers,
ensure the slides are pushed back
fully.
Crisper cover
It is for controlling the temperature
of the crisper and avoiding the
vegetable losing moisture. You can
adjust the humidity inside the crisper
by using the sliding block.
2. Using your freezer drawer
The freezer drawers are suitable for
storage of foods required to be frozen,
such as meat, ice cream and others.
The drawers
The drawers are mounted on
telescopic extension slides and can
be removed in the same way as
removing the crispers in the
It is for storing bottled wine or drinks.
r e m o v i n g th e cr i s p e r s i n th e
refrigerator compartment.
Caution! Ensure that bottles are
not stored in the freezer as freezing
may cause the bottle to explode.
Twistable ice maker
It is used to make and store ice
cubes. You should use it as follows.
1. Pull out the twistable ice maker
from the installation bracket in the
freezer drawer.
2. Place the ice maker on level.
3. Pour water into the ice trays and
the water line shall not exceed the
top line of ice tray.
4. Place the filled ice maker back to
the bracket.
5. When ice cubes form, twist the
knobs clockwise and the ice will
drop into the ice box below.
6. Ice cubes can be stored in the ice
box, if you need them, you can pull
out the ice box and take them out.