Hisense U5120GW Quick Start Guide

Quick Start Guide
1
Remote Control
5.1.2CH Soundbar with Wireless Subwoofer
Model: U5120GW
Replace the Remote Control Battery
1 Press and slide the back cover to
open the battery compartment of the
remote control.
2 Insert two AAA size batteries.
Make sure the (+) and (–) ends of the
batteries match the (+) and (–) ends
indicated in the battery compartment.
3 Close the battery compartment cover.
- Do not mix old and new batteries;
- Do not mix alkaline, standard (Carbon-Zinc) or
rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
1
Switch the unit between ON and
STANDBY mode.
2
Select the play function.
3
SURR Adjust the surround ON/OFF.
4
(BT) Select the Bluetooth mode. Press
and hold the
(BT) button to
activate the pairing function in
Bluetooth mode or disconnect the
existing paired Bluetooth device.
5
EQ Select a preset sound eect.
6
/ Skip to previous/next track in BT /
USB mode.
7
VOL+/- Increase/decrease the volume level.
8
Play/pause/resume playback in BT
/ USB mode. Press and hold the
button for 3s to enter setup menu.
Conrm a selection.
9
BASS+/- Adjust bass level.
10
TREBLE+/- Adjust treble level.
11
DIMMER+/- Adjust display brightness.
12
(MUTE) Mute or resume the sound.
1
3
7
9
2
4
5
6
8
11
10
12
What’s in the Box
AC power Cord *
x 2
Main Unit
Remote Control /
AAA Batteries x 2
Wireless Subwoofer
Wall Mounting Screws (x2) / Brackets (x2) /
Bracket Screw (x4) / Wall Anchors (x4)
User Manual /
Quick Start Guide
HDMI Cable
* Power cord quantity and plug type vary by regions.
OPTICAL Cable
EN

Hisense U5120GW Specifications

General

Brand	Hisense
Model	U5120GW
Category	Speaker System
Language	English