- 14 -
Connecting an external DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD players instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, Input selection section.
Most DVD players are connected through SCART sockets. Use a scart cable to connect as
shown below.
You may also connected through COMPONENT sockets. Use a component video cable to
connect video input. For enabling audio, use a component audio cable as illustrated below.
When done, switch to FAV source. See, "Input selection" section.
+'0,
,QSXW
REAR VIEW
Note: These three methods of connection perform the same function but in different levels of
quality. It is not necessary to connect by all three methods.
SIDE VIEW
ENG-01-TV-22784W-1165UK-MB29-PEUIDTV-(1SCRT-AV-YPBPR-HP-SPDIF-STRLOUT-PCIN)-10060401-5013xxxx.p6511.10.2008, 17:3714
To Next Page
Loading...
Need help?
General