Note:
• Sub-screen for confirmation of LPAR deactivation might not be
displayed depending on configuration of Deactivation and
Reactivation in LP Options screen.
3. Operated LPAR is deactivated as follows.
Figure 5-50 LPAR Status Confirmation Screen
Note:
• If LP Auto Shutdown is set in LP Options screen, the LPAR
manager shutdown is performed automatically after all the LPARs
have been deactivated.
Termination of LPAR manager
Shutting down of LPAR manager
All LPARs have to be deactivated for shutting down the LPAR manager. See
Deactivation of LPAR on page 5-65 to deactivate LPAR. See LPAR manager
Shutdown on page 10-13 for note.
1. Press Alt + r on any screen for displaying sub-screen of Shutdown
LPAR manager system. Then select Shutdown and press Enter key.
Setup of LPAR manager
5-67
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
To Next Page
Loading...
Need help?
General