English j
Meanings of symbols
NOTE! Some units do not carry them.
4\\
\
symboms
_WARNmNG
The following show symbols used for the machine. Be sure
that you understand their meaning before use.
@
It is important that you read, fully understand and observe the following safety precautions and
warnings. Careless or improper use of the unit may cause serious or fatal injury.
Read, understand and follow all warnings and instructions in this manual and on the unit.
Always wear eye, head and ear protectors when using this unit.
Warning, kickback danger. Be careful sudden and accidental upward and/or backward mo-tion
of the guide bar.
One-handed usage not permitted. While cutting, hold saw firmly with both hands with thumb
firmly locked around front handle.
Before using your machine
• Read the manual carefully.
,, Check that the cutting equipment is correctly assembled and adjusted.
,, Start the unit and check the carburetor adjustment. See "Maintenance".
Contents
What is what? ............................................................... 2
Warnings and safety instructions .................................. 3
Specifications ................................................................ 5
Assembly procedures .................................................... 6
Operating procedures ................................................... 7
Maintenance .................................................................. 11
Parts breakdown ........................................................... 45
To Next Page
Loading...
Need help?
General
