ENGLISH
8.6 MENU
8.6.1 OPERATION INFORMATION
In operation information menu it is possible to nd the most important setting parameters of the system besides the information of
the operation conditions.
Detailed information about DHW:
• Operation
• Current temperature
• Setting Temperature
• Electrical Heater Status
• Electrical Heater Operation
• Legionella Status
• Legionella Operation
Detailed information about:
• Operation status
• Water setting temperature
• Outdoor ambient temperature
• Outdoor ambient 2 temperature
• Outdoor ambient average temperature
• Second ambient average temperature
• 24h average temperature
Detailed information modules:
• Operation status
• Water inlet temperature
• Water outlet temperature
• Individual DHW (Enable or disable)
• Type (Master or Slave)
Detailed information about Circuit 1-2:
• Operation (Demand ON/OFF)
• Mode (Eco/Confort)
• Room temperature
• Room setting temperature
• Current water temperature
• Water setting temperature
• Water OTC setting temperature
• Mixing valve position (only for circuit 2)
1 / 2
Detailed information about Electrical Heater:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
• Load Factor
• Step
Detailed information about Swimming pool:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
Detailed information about Boiler combination:
• Operation (Demand ON/OFF)
• Current temperature
• Setting temperature
Detailed information about Solar
combination:
• Operation (Demand ON/OFF)
• Solal Panel temperature
Shows a list of the alarm history of the
system
2 / 2
YUTAKI CASCADE CONTROLLER
PMML0510 rev.1 - 10/2019
125
To Next Page
Loading...
Need help?
General