7
English
APPLICATIONS
For charging the HITACHI batteries types EB7,
EB9, EB12, EB14, EB18, BCC9, BCC12, BCC14
and BCC18 series.
CHARGING METHOD
NOTE
Before plugging into the receptacle, make sure
the following points.
○ The power source voltage is stated on the
nameplate.
○ The cord is not damaged.
WARNING
Do not charge at voltage higher than
indicated on the nameplate.
If charged at voltage higher than indicated
on the nameplate, the charger will burn up.
1. Insert the plug of battery charger into the
receptacle.
WARNING
Do not use the electrical cord
if damaged. Have it repaired
immediately.
2. Insert the battery to the battery charger.
Insert the battery into the battery charger as
shown in Fig. 2.
BCC1212
EB1212S
EB1214L
EB1214S
EB1220BL
EB12S
FEB12S
EB12B
BCC912
EB912S
EB9S
FEB9S
EB914
EB914S
EB9B
BCC1412
EB1412S
EB1414
EB1414S
EB14B
EB712S
EB7S
FEB7S
EB714S
EB7B
EB1812S
EB1820
EB18B
BCC1812
EB1814SL
EB1820L
Fig. 2
000BookUC18YKUS.indb7000BookUC18YKUS.indb7 2010/03/1214:42:412010/03/1214:42:41
To Next Page
Loading...
Need help?
General
