Pull out the fastening strap from
the slit on the seat-back. Then
attach the anchor on the fastening
strap to the hook on the center
pillar.
Pull down on the anchor to engage
the upper part of the anchor
securely on the hook, and make
sure the seat is secure.
Unlock the seat from the floor by
pulling the lock release strap
located at the rear of the seat
cushion, under the seat back, then
lift the rear of the seat.
You cannot fold up the rear seat if
it is not latched securely in the
rearmost position.
3. 4. 5.
CONTINUED
Seats
Instruments and Controls
105
LOCK RELEASE STRAP
ANCHOR
HOOK
FASTENING
STRAP
ANCHOR
FASTENING STRAP
HOOK
０８／０７／２２ １７：５７：２７ ３１ＳＷＡ６２０ ０１１０
To Next Page
Loading...
Need help?
General
