In this case, the starter motor’s
speed sounds normal, or even faster
than normal, when you turn the
ignition switch to the START (III)
position, but the engine does not run.
Are you using a properly coded
key? An improperly coded key will
cause the immobilizer system
indicator in the instrument panel
to blink rapidly (see page ).
Are you using the proper starting
procedure? Refer to
on page .
Do you have fuel? Check the fuel
gauge; the low fuel indicator may
not be working.
There may be an electrical
problem, such as no power to the
fuel pump. Check all the fuses
(see page ).
Ifyoufindnothingwrong,youwill
need a qualified technician to find
the problem. See
on page .
61
327
332
246
The Starter Operates Normally
Starting the
Engine
Emergency
Towing
IftheEngineWon’tStart
Taking Care of the Unexpected
319
０８／０７／２２ １８：２６：３８ ３１ＳＷＡ６２０ ０３２４
To Next Page
Loading...
Need help?
General
