EasyManuals Logo
Home>Honda>Automobile>2009 Element

Honda 2009 Element User Manual

Honda 2009 Element
345 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #296 background imageLoading...
Page #296 background image
3. Connect one jumper cable to the
positive () terminal on your
battery. Connect the other end to
the positive () terminal on the
booster battery.
4. Connect the second jumper cable
to the negative () terminal on
the booster battery. Connect the
other end to the grounding strap
on your vehicle as shown. Do not
connect this jumper cable to any
other part of the engine.
5. If the booster battery is in another
vehicle, have an assistant start that
vehicle and run it at a fast idle.
6. Start your vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
7. Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
Jump Starting
292
2009 Element

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honda 2009 Element and is the answer not in the manual?

Honda 2009 Element Specifications

General IconGeneral
BrandHonda
Model2009 Element
CategoryAutomobile
LanguageEnglish

Related product manuals