Honda CH250 Elite 1986 User Manual

HOW TO USE THIS MANUAL
Follow the Maintenance Schedule (Section 3) recom-
mendations to ensure that the scooter is in peak operat-
ing condition and the emission levels are within the
standards set by the U.S. Environmental Protection
Agency. the first scheduled maintenance is
very important. It compensates for the initial wear that
occurs the break-in period.
Sections 1 thfiDuc:h 3 to the whole scooter, while
sections 4 17 describe parts of the scooter,
grouped to location.
Find the section you want on this page, then turn to the
table of contents on page 1 of that section.
Most sections start with an assembly or system
illustration, service information and tro1ubl,eshloo·ting for
the section. The subsequent pages detailed proce·
dures.
If you are not familiar with this scooter, read the TECH-
NICAL FEATURES in section 18.
If you don't know the source of the trouble, go to sec-
tion 19, TROUBLESHOOTING.
information. illustrations, directions and
flcations included in this publication are based on
the latest product information available at the
time of approval for printing. HONDA MOTOR
CO., lTD. reserves the right to make changes at
any time without notice and without incurring any
obligation whatever. No part of this publication
may be reproduced without written permission.
'LI''\I' MOTOR , LTD.
SPI'\II ·'" Publications Office
of Issue: April, 1986
© HONDA MOTOR CO" LTD.
CONTENTS

Honda CH250 Elite 1986 Specifications

General

Engine Type	Single-cylinder, four-stroke
Displacement	244 cc
Bore x Stroke	72.0 mm x 60.0 mm
Compression Ratio	10.0:1
Fuel System	Carburetor
Ignition	CDI
Starting System	Electric
Transmission	Automatic
Final Drive	V-Belt
Front Suspension	Telescopic fork
Rear Brake	Drum
Front Tire	3.50-10
Seat Height	760 mm
Cooling System	Liquid-cooled