Honda EU30is User Manual

53
Installation:
1.Make sure that the engine switch is turned OFF.
2.Connect the battery positive (+) cable to the battery positive (+) 
terminal, then the battery negative (–) cable to the battery negative
(–) terminal. Tighten the bolts and nuts securely.
3.Install the battery holder band.
4.Install the front cover, and install the four 6 mm cap nuts.
CAUTION:
When disconnecting the battery cable, be sure to disconnect at the
battery negative (–) terminal first. To connect, connect at the positive
(+) terminal first, then at the negative (–) terminal. Never dis/connect
the battery cable in the reverse order, or it causes a short circuit when
a tool contacts the terminals.
This symbol on the battery means that this product must not
be treated as household waste.

NOTE:
An improperly disposed of battery can be harmful to the environment
and human health.
Always confirm local regulations for battery disposal.
<6DQQMࡍ࡯ࠫ㧞㧜㧝㧞ᐕ㧣᦬㧟ᣣޓἫᦐᣣޓඦᓟ㧞ᤨ㧠㧣ಽ

Honda EU30is Specifications

General

Model	EU30is
Type	Portable Inverter Generator
Starting Watts	3000W
Running Watts	2800W
Rated Voltage	230V
Rated Amperage	12.2A
Engine	Honda GX200
Engine Displacement	196 cc
Maximum AC Output	3000 VA
Rated AC Output	2800 VA
Fuel Type	Gasoline
Fuel Tank Capacity	13 L
Run Time at 1/4 Load	20 hours
Starting System	Recoil/Electric