HOW TO READ THE MANUAL
Some paragraphs in the manual containing information of particular impor-
tance for safety and operation are highlighted at various levels of emphasis,
and signify the following:
NOTE
or
IMPORTANT
These give details or further in-
formation on what has already been said, and aim to prevent damage to the
machine.
WARNING!
Non-observance will result in the risk of injury to
oneself or others.
DANGER!
Non-observance will result in the risk of serious
injury or death to oneself or others.
This manual describes various versions of the machine, which mainly dier
in:
– type of transmission: with mechanical gear-change or with hydrostatic
continuous speed adjustment;
– particular ttings and/or attachments.
The symbol
highlights all dierences in usage and is followed by the
indication of the version to which it refers.
The symbol “
” makes a reference to another part of the manual where
further information or clarication can be found.
NOTE
Whenever a reference is made to a
position on the machine “front”, “back”, “left” or “right” hand
side, this is determined by facing the direction of forward
travel.
IMPORTANT
For all usage and maintenance opera-
tions on the battery which are not described in this manual,
consult the relevant manual which form an integral part of
all the documentation supplied with the machine.
TABLE OF CONTENTS
1. SAFETY REGULATIONS ................................................ 2
Regulations for using the machine safely
2. IDENTIFICATION OF THE MACHINE
AND COMPONENTS ...................................................... 5
Explanations on how to identify the machine
and its main components
3. UNPACKING AND ASSEMBLY ...................................... 6
Explanations on how to remove the packing
and on how to assemble separated parts
4. CONTROLS AND INSTRUMENTS ................................. 8
Position and functions of all the controls
5. HOW TO USE THE MACHINE ...................................... 10
Provides indications for working eciently and safely
5.1 Safety recommendations ......................................... 10
5.2 Why the safety devices cut in ................................... 11
5.3 Preliminary operations before starting work ............. 11
5.4 Using the machine ................................................... 12
5.5 Using on slopes ....................................................... 16
5.6 Transport position .................................................... 17
5.7 Advice on how to obtain a good cut ......................... 17
5.8
Summary of the main operations to be carried out
in various condition
.................................................... 17
6. MAINTENANCE ............................................................ 18
All the information for maintaining the machine
in peak eciency
6.1 Safety recommendations ......................................... 18
6.2 Routine maintenance ............................................... 18
6.3 Checks and adjustments ......................................... 19
6.4 Dismantling and renewing parts ............................... 22
7. ENVIRONMENTAL PROTECTION ............................... 24
It gives advice on machine use and respecting
the environment
8. TROUBLESHOOTING ................................................... 25
A help in quickly resolving any problems
9. ATTACHMENT ON REQUEST ..................................... 26
This is the list of attachments available
for particular operational requirements
10. SPECIFICATIONS ........................................................ 27
A summary of the main specications of your machine
11. ALPHABETICAL INDEX ............................................... 28
Where information can be found
MAJORS HONDA DISTRIBUTOR ADDRESSES ............ i
“EC Declaration of Conformity”
CONTENT OUTLINE ....................................................... ii
INTRODUCTION
Dear Customer,
thank you for having chosen one of our products. We hope you will be com-
pletely satised with your new ride-on lawnmower and that it will fully meet
all your expectations.
This manual has been compiled in order that you may get to know your ma-
chine and to be able to use it safely and eciently. Don’t forget that it forms
an integral part of the machine, so keep it handy so that it can be consulted
at any time, and pass it on to the purchaser if you resell the machine.
This new machine of yours has been designed and made in line with current
regulations, and is safe and reliable if used for cutting and collecting grass
exactly following the instructions given in this manual (proper usage). Using
the machine in any other way or ignoring the instructions for safe usage,
maintenance and repair is considered “incorrect usage” (
5.1) which will
invalidate the guarantee, and the manufacturer will decline all responsibility,
placing the blame with the user for damage or injury to himself or others in
such cases.
Since the product is continually being improved, you may nd slight die-
rences between your machine and the descriptions contained in this manual.
Certain modications can be made to the machine without prior warning and
without the obligation to update the manual, although the essential safety and
function characteristics will remain unaltered. In case of any doubts, do not
hesitate to contact your Dealer. And now enjoy your work!
After-sales Service
This manual gives all the necessary instructions for using the machine and
the basic maintenance that may be carried out by the user.
Contact your Dealer for operations not described in this manual.
1 EN
Honda France Manufacturing S.A.S.
Pôle 45 - Rue des Châtaigniers - 45140 ORMES - FRANCE
All rights reserved
Write your
machine’s model here
H F 2 _ _ _ _ _ _
Note your
machine serial number here
M A _ _ _ _ _ _ _ _ _
ORIGINAL INSTRUCTION
OPERATOR’S MANUAL
HF2315 • HF2417 • HF2622
Ride-on lawnmower
ENGLISH
CG71505502H9 • HF2315K3 - HF2417K4 - HF2622K1
To Next Page
Need help?
General
