Need help?Do you have a question about the Honda Marine BF60A and is the answer not in the manual?
General| Displacement | 998 cc |
|---|---|
| Max Power Output | 60 HP |
| Full Throttle RPM Range | 5000-6000 RPM |
| Valve Train | SOHC |
| Fuel Delivery | Programmed Fuel Injection (PGM-FI) |
| Starting System | Electric |
| Cooling System | Water Cooled |
| Lubrication | Wet Sump |
| Oil Capacity | 3.5 L |
| Trim Range | -4° to +16° |
| Steering | Remote |
| Gear Shift | Forward, Neutral, Reverse |
| Engine Type | 4-Stroke SOHC |
| Ignition System | Transistorized |
| Alternator | 12V |
| Tilt Range | 70° |
| Shaft Length | 20 inches |
| Fuel Tank Capacity | External |
Discusses the importance of safety and how the manual guides users to avoid hazards.
Provides essential safety guidelines for using the BF60A/BFP60A outboard motors.
Shows the location of important safety labels on LRTA, LRTB, and XRTA type models.
Details safe practices for refueling, including fire and explosion hazards.
Explains model codes and identifies features for different outboard motor types.
Illustrates the location of various components and controls on the LHT type outboard motor.
Describes the function and operation of the ignition switch for LHT type controls.
Introduces various instruments like Trim Meter, Tachometer, and Digital Tachometer.
Emphasizes safety and preparation before operating the outboard motor.
Outlines crucial safety checks to perform before operating the outboard motor.
Explains how to adjust the tiller handle height and angle for optimal operator comfort.
Covers essential safety measures for operating the outboard motor safely.
Provides a detailed 10-hour break-in procedure for optimal engine performance and longevity.
Guides users through the engine starting process for LHT and remote control types.
Explains the correct procedure for stopping the engine after operation.
Stresses the necessity of proper maintenance for safe and reliable operation.
Details the regular service periods and recommended maintenance items for the outboard motor.
Provides step-by-step instructions for changing the engine oil, including disposal advice.
Explains how to service spark plugs, including inspection, gap measurement, and replacement.
Details the safe removal and installation procedures for the outboard motor propeller.
Lists possible causes and corrections for an engine that will not start.
Outlines troubleshooting steps for engines that are hard to start or stall after starting.
Explains the function of different fuses and troubleshooting for electrical issues.
Shows where to find product and engine serial numbers for identification and warranty purposes.
Details minimum battery requirements and precautions for connecting the battery.
Lists key technical specifications for BF60A and BFP60A models.
Outlines the terms and conditions of the distributor's limited warranty for outboard motors.
To Next Page