Adding Engine Oil
If the engine oil is below or near the lower
level mark, add the recommended engine oil.
2 P. 79, 2 P. 146
1.
Remove the oil fill cap/dipstick. Add the
recommended oil until it reaches the
upper level mark.
u
Place your scooter on its centre stand
on a firm, level surface when checking
the oil level.
u Do not overfill above the upper level
mark.
u
Make sure no foreign objects enter the
oil filler opening.
u
Wipe up any spills immediately.
2.
Securely reinstall the oil fill cap/dipstick.
NOTICE
Overfilling with oil or operating with insufficient
oil can cause damage to your engine. Do not mix
different brands and grades of oil.
For the recommended oil and oil selection
guidelines, see “Maintenance Fundamentals.”
2 P. 79
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
scooter serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious
damage to the engine.
1.
If the engine is cold, idle the engine for 3
to 5 minutes.
2.
Turn the ignition switch to the (Off)
position and wait for 2 to 3 minutes.
3.
Place your scooter on its centre stand on
a firm, level surface.
20180831183849_32K0BD010_eng_BOOK Page 94 Friday, August 31 2018 18:44:26 JST
Engine Oil u Adding Engine Oil
Maintenance
91
Continued
To Next Page
Loading...
Need help?
General