1 - 5
Reading Techniques
The engine has a view finder that projects a bright red or green aiming beam that
corresponds to the engine’s horizontal field of view. The aiming beam should be
centered over the bar code, but it can be positioned in any direction for a good
read.
The aiming beam is smaller when the engine is closer to the code and larger
when it is farther from the code. Symbologies with smaller bars or elements (mil
size) should be read closer to the unit. Symbologies with larger bars or elements
(mil size) should be read farther from the unit. To read single or multiple
Linear bar code 2D Matrix symbol
To Next Page
Loading...
Need help?
General
