Honeywell DBC2000 Series - MAINTENANCE, SERVICE LIFE, AND WARRANTY; Product Lifetime, Inspection, and Replacement; Warranty Information Clarification

ENI7003R8 KO65 2013
17
Maintenance and service
The designed lifetime* of this product is 10 years, based on date code, or 1.000.000 cycles under normal
conditions, according to:
a) the standard EN 298
b) the table on designed lifetime as stated on the Afecor website http://www.afecor.org/
We cannot assume that the product can be safely used beyond the mentioned designed lifetime. This lifetime is
based on use of the control according manufacturer’s instructions.
Regular inspection of the control by authorized personnel in accordance with guidelines of the appliance
manufacturer is required.
After reaching the designed lifetime the product has to be replaced by authorized personnel.
Note: * Warranty as opposed to designed lifetime is described in the delivery terms.