Honeywell EXCEL 5000 Product Data

® U.S. Registered Trademark
Copyright © 2016 Honeywell Inc. • All Rights Reserved EN0B-0090GE51 R0316
Distributed I/O
XFL521B, 522B,
523B, AND 524B MODULES
HONEYWELL EXCEL 5000 OPEN SYSTEM
PRODUCT DATA
FEATURES
 LONMARK™ compliant
 2-wire L
ONWORKS
®
bus interface between controller
and I/O
 No additional field terminals required
 Usable with Excel 500 controllers in conjunction with
standard internal I/O modules
 Automatic binding and commissioning to Excel 500
controllers when using CARE
 Connector module with sliding bus connector
(eliminating the need to wire together neighboring
modules)
 Fast connection due to spring clamp terminals
 Module exchange during operation
 Alarm in case of defective module
 Mechanical coding prevents mismatching of modules
 Power LED (L1, green) and L
ONWORKS service LED (L2,
red) on all electronics modules
 Status LEDs for outputs and digital inputs
 Optional manual override modules for analog and
digital output modules with feedback
 XILON for wiring test
GENERAL
The XFL521B, 522B, 523B, and 524B modules are LONMARK
compliant digital and analog I/O modules which can be
installed at strategic locations within a building. These
modules convert sensor readings and provide output signals
used for operating actuators via L
ONWORKS standard network
variables (SNVTs). Each Distributed I/O module plugs into a
base terminal block allowing communication with controllers
via the built-in Echelon
®
LONWORKS bus interface. The ter-
minal block provides spring clamp terminals for easy connec-
tion of field cables from the various sensors and actuators.
The modular system allows DI/O's to be removed from the
system without disturbing other modules. The module with
terminal block mounts easily onto a DIN rail.
When using CARE, the DI/O's can be automatically bound
and commissioned to the Excel 500 CPU (XC5010C,
XC5210C, XCL5010) and XL50. When the modules are used
by other controllers, provided plug-ins permit the modules to
be commissioned by CARE 4.0 or by any LNS network
management tool.
DESCRIPTION
These Distributed I/O modules use a Neuron® chip and an
FTT-10A free topology transceiver for communication on a
L
ONWORKS bus and comply with LONMARK Application Layer
Guidelines V3.2.
Table 1. Modules and accessories
iItem description
XFL521B Analog input module
XFL522B Analog output module
XFL523B Digital input module
XFL524B Digital output module
XSL511 LONWORKS connector module
XSL512 Manual terminal disconnect module
XSL513 Terminal block for XFL521x, 522x, 523x
XSL514 Terminal block for XFL524x
XFR522A Analog output manual override module
XFR524A Digital output manual override module
XAL-Code To prevent mismatching modules
XAL-Term2 Interface to the LONWORKS bus
XAL 2 Cover release tool
XAL 1 Swivel label (for manual override modules)

Honeywell EXCEL 5000 Specifications

General

Brand	Honeywell
Model	EXCEL 5000
Category	Control Systems
Language	English