Need help?Do you have a question about the Honeywell Hyperion 1300G and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D |
| Maximum range | 0.66 m |
| Read rate (max) | 270 reads/s |
| Pitch reading angle | -65 - 65 ° |
| Light levels (direct sunlight) | 0 - 70000 lx |
| Cable length | 3 m |
| Standard interfaces | USB |
| Connectivity technology | Wired |
| Input voltage | 5 V |
| Power consumption | 200 mA |
| Safety | RoHS, CE |
| Shockproof | Yes |
| Product color | Black |
| International Protection (IP) code | IP41 |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 112 mm |
|---|---|
| Width | 79 mm |
| Height | 150 mm |
| Weight | 160 g |
Configures scanner for common interfaces like USB, RS232, and Keyboard Wedge using Plug and Play codes.
Configures RS232 baud rate, data bits, stop bits, and handshaking parameters.
Sets keyboard country layout, ALT mode, style, and modifiers for optimal input.
Configures beeper and LED feedback for successful barcode reads and errors.
Sets scanner activation modes, read timeouts, and hands-free operation.
Adds/clears prefixes/suffixes, transmits extended ASCII, and configures data transmission delays.
Uses Data Format Editor and commands to customize barcode output and data manipulation.
To Next Page
