Honeywell MS3780 Fusion Setup/Service Instructions

MDE-4636C Honeywell® MS3780 Fusion Scanner Setup/Service Instructions · July 2021 Page 1
Introduction
Purpose
This manual provides instructions for programming the Honeywell
®
MS3780 Fusion Scanner
for use with Gilbarco
®
equipment.
This scanner does not support the Passport Age Verification feature. If you want to utilize
Age Verification, you must refer to MDE-5557 Honeywell Xenon
™
Scanner 
Setup/Service Instructions. The Honeywell Xenon Scanner is the only 2D scanner tested
and approved by Gilbarco.
IMPORTANT INFORMATION
Table of Contents
Topic Page
Introduction 1
Important Safety Information 5
Programming Information 7
Fusion Scanner 9
Maintenance 15
Site Visit 16
Troubleshooting G-SITE Scanner Errors 18
Troubleshooting Passport Scanner Errors 19
Programming the Honeywell MS3780 Fusion Scanner 20
Scanning Items 39
Parts List
The following parts are included in the Honeywell Fusion Scanner Kit (PA02710403):
Item Description Part Number Quantity
1 Scanner, Hand-held Q12651-21 1
2 Gender Mender Q13180-35B 1
3 Connector, Jack Screw (Female) Q10437-02 1
4 Cable, Work Area, 6 feet Q13850-06 1
MDE-4636C
Honeywell
®
MS3780 Fusion Scanner
Setup/Service Instructions
July 2021

Honeywell MS3780 Fusion Specifications

General

Scan speed	1333 sec/page
Wavelength	650 nm
Decoding standards	1D, GS1
Dimensions (WxDxH)	189 x 65 x 73 mm
Standard interfaces	Keyboard wedge
Input voltage	5 V
Certification	FCC Part 15, ICES-003, EN55022 Class B
Product color	Black
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	-20 - 40 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	195 g