Page 2 of 2 DOC-02-034
© 2009 by Honeywell International Inc. All rights reserved.
Unauthorised use of this document is strictly prohibited.
This document is not intended for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specic applications or anticipate all requirements.
All specications are subject to change without notice.
For more information contact your nearest Notier Sales Oce or Distributor
www.notier.com.au
LDM-32
The Notier LDM-32 Lamp Driver Module is
for use as a site specic mimic panel or
wherever LED annunciation is required.
Features
• 32 alarm lamp-driver transistors (sink to
power common on alarm).
• May be powered by 24 VDC from the
panel or by remote power supplies.
• Ecient switch-power converter reduces
power consumption.
• Microprocessor-controlled electronics,
fully supervised.
• Plug-in terminal blocks for ease of
installation and service.
LDM-R32
Notier's LDM-32R connects to the LDM-32
for electrical isolation when interfacing the
system to other equipment such as EWIS
or wherever a large number of relays are
required.
Features
• Converts the LDM-32 transistor outputs
to 32 dry contacts (1.0 A @ 30 VDC).
• Provides 32 output terminal screw
connections and a single common
terminal screw.
LDM-32
LDM-R32
To Next Page
Loading...
Need help?
General
