Honeywell Notifier AFP-3030 User Manual

DOC-02-159:rev C - Page 2 of 8
Display Features
• Large LCD Display: 640 characters (16 lines x 40
characters) with long-life LED backlight
• Program keypad: full QWERTY keypad for field
programmability
• UserControl:Up to nine users, each with a password
and selectable access levels
• LED indicators: Fire; Pre-Alarm; Fault; Disable;
Supervisory; Other Event; System Fault; Alarm Routing
Equipment Status; Alarm Devices Status; Smoke Control
Status; Controls Active
• Membrane Switch Controls: Silence Buzzer; Silence/
Re-sound Alarm; Scroll Alarms; Reset; Disable
Flashscan® Intelligent Features
• Polls up to 318 devices on each loop in less than two
seconds
• Activates up to 159 outputs in less than five seconds
• Multicolor LEDs blink device address during Walk Test
• Fully digital, high-precision protocol
• Manual sensitivity adjustment - up to nine levels
• Pre-alarm ONYX intelligent sensing - up to nine levels
• Sensitivity levels:
- Ionization – 0.3 to 0.6 MIC X
- Photo electric – 2.0 to 8.0%/metre obscuration
- Laser (VIEW®) – 0.07 to 6.4%/metre obscuration
- Acclimate Plus™ – 2.0 to 10.0%/metre obscuration
- IntelliQuad™– 1.6 to 12.5%/metre obscuration
• Drift compensation
• Multi-detector algorithm involves nearby detectors in
alarm decision
• Automatic detector sensitivity testing
• Maintenance alert (two levels)
• Self-optimizing pre-alarm
• Programmable activation of sounder/relay bases during
alarm or pre-alarm
• Read Status displays the level of detector cleanliness
FSP-851AUS
Photoelectric Smoke Sensor
• Advanced ONYX intelligent sensing including automatic
drift compensation to reduce unwanted alarms and
provide warning of contamination build-up
• Addressable operation pinpoints the fire location
• Protection against the entry of insects and other
contaminants
FAPT-851AUS Acclimate Plus™
Intelligent Multi-Criteria Detector
• Detector automatically adjusts sensitivity levels without
operator intervention or programming. Sensitivity
increases with heat
• Microprocessor-based technology; combination photo
and thermal technology
FSC-851AUS IntelliQuad™
Advanced Multi-Criteria Detector
• Detects all four major elements of a fire (smoke, heat,
CO, and flame)
• Automatic drift compensation of smoke sensor and CO
cell
• High nuisance-alarm immunity
FSL-751 VIEW® (Very Intelligent Early Warning)
Smoke Detection Technology
• Advanced ONYX intelligent sensing algorithms
differentiate between smoke and non-smoke signals
• Addressable operation pinpoints the fire location
• Early warning performance comparable to the best
aspiration systems at a fraction of the lifetime cost
FST-851(R)-WP
Sealed Thermal Sensor
• Suitable for harsh environments with wide operating
temperature and sealed to IP67
• Addressable operation pinpoints the fire location and
annunciates alarm with dual LEDs
FMM-4-20 Interface Module
• Interface to industry standard linear scale 4-20mA
sensors
• Five programmable thresholds
Voice Evacuation Features
• Up to eight channels of digital audio when using DVC
• 50 watt digital amplifiers (DAA2 series)
• 30/60/120 watt digital amplifiers (DA Series)
• Solid state message generation
• Hard-wired voice control module options
• Backup tone generator and amplifier option

Honeywell Notifier AFP-3030 Specifications

General

Brand	Honeywell
Model	Notifier AFP-3030
Category	Control Panel
Language	English