Honeywell PX940 User Manual

PX940 User Guide 93
Verifier Settings
Verifier
Setting
Description Default
Verification Type Select the verification type to check the barcode.
None - No barcode validation
Read/No Read - Validate if barcode is readable
ISO15415/15416 - Full ANSI grading of barcode
ISO15415/
15416
Passing Grade Sets the minimum passing grade for barcode grading.
Grade 0.0 (F) is the lowest grade.
Grade 1.5 (C) is the default and recommended by ISO
standard. Only applied when verification type is set to
ISO15415/15416.
1.5 (C)
Aperture Indicates the aperture size (in mils) used for verification.
Aperture size will be chosen automatically based on ISO
standard. Change only if required by an overriding
application.
Automatic
Max Consecutive
Failures
Sets maximum number of times printer encountered
verification failure consecutively before prompting for user
action. This setting is only applicable when the Verification
Failure Action is set to Void and Reprint.
3
Verifier Failure
Action
Indicates action to take when label fails verification.
Void and Reprint (default) - Retract and void the failed
label, then reprint the failed label. Stop reprint if the
maximum consecutive failures have been reached.
Ignore and Continue - No voiding when verification fails.
Result is saved and next label is printed.
Note: During multiple label printing, printer will void the
failed label (plus all printed and yet to be verified labels) in
order to keep the good labels in sequence.
Void and
Reprint
Save Failed
Label Images
When enabled, the printer saves all failed label images in
non-volatile memory. Maximum 100 images can be saved
(if memory available). At maximum capacity oldest image
file will be replaced by newest.
Enable
Void Pattern Select the void pattern type to mark the failed label. Diamond

Honeywell PX940 Specifications

General

Ethernet LAN	Yes
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Flash memory	256 MB
Internal memory	1024 MB
Page description languages	DP, DPL, XML, ZPL II, IPL
Operating temperature (T-T)	5 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Cables included	AC
Color	No
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI
Minimum print length	4800 mm
Maximum printing width	108 mm
Ribbon width	110 mm
Core diameter	25 mm
Ribbon length	450 m
Maximum roll diameter	80 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Display	LCD
Product color	Black
Display diagonal	3.5 \
Harmonized System (HS) code	84433210

Weight and Dimensions

Depth	506 mm
Width	261 mm
Height	398.7 mm
Weight	23000 g