4
Install Push Button
1. Mount the push button
bracket in the desired
location.
Use the screws
Use the adhesive backing. If
using the adhesive backing,
clean the surface first.
2. Snap the push button onto
the mounting bracket.
–OR–
Note: If you need to remove the push button, use a small
screwdriver to release the tab.
Install Doorbell
If you are not mounting the doorbell to the wall, place it where you want it.
1. Screw the doorbell wall mounting bracket
to the wall using the included screws and
anchors (if necessary).
Drill 1/4 inch holes for the anchors.
2. Hang the doorbell on the
mounting bracket.
To Next Page
Loading...
Need help?
General
