Honeywell RTH111 series User Manual

RTH111
9 69-2603ES—01
RTHXXXX
M32707
W/
Aux
Not
Used
M32757
Heat Off Cool Auto On
Fan
Battery replacement
Install two fresh AAA batteries when
Lo Batt flashes on the screen. Lo
Batt appears for 60 days before the
batteries are depleted.
Replace batteries once a year, or
when you will be away for more than
a month.
The settings are stored in non-volatile
(permanent) memory and are thus
preserved when the thermostat is
without batteries.
SettheSystemswitchtoOffbeforeremovingthe
batteries.Otherwise,theheating/coolingsystem
could remain activated even when batteries are
removed.
Pull at bottom to
remove thermostat
from wallplate.
Turn thermostat over,
insert fresh AAA alkaline
batteries, then reinstall
thermostat.

Honeywell RTH111 series Specifications

General

Temperature Control	Manual
Stages	1 Heat/1 Cool
Temperature Range	40°F to 90°F (4°C to 32°C)
Backlight	No
Display	Digital
Compatibility	Single-stage heating and cooling systems
Power Source	Battery powered
Voltage	24V
Type	Non-programmable thermostat