PRODUCT DATA
33-00096-04
VisionPRO® 8000 Smart
Thermostat
APPLICATION
The VisionPRO® 8000 Smart thermostat features an
effortless, 7-Day programmable touchscreen thermostat
that provides control of temperature and one of the
following: humidification, dehumidification, or ventilation.
Up to 3 Heat/2 Cool heat pump systems or up to
2 Heat/2 Cool conventional systems are supported in
residential and commercial applications.
FEATURES
• Thermostat acquires weather data through either a
wired sensor or an Internet connection
•U1 Terminals
One set of dry contacts (U1) that are configurable for
one IAQ product, such as a Humidifier, Dehumidifier or
Ventilator.
• Thermostat S1, S1
Configurable S1 Terminals can be configured for a
wired indoor, wired outdoor, or discharge air sensor.
• On-board Humidity sensor
• Customizable Service Reminders
Set up to 10 service reminders. Choose from the pre-set
options or customize your own. Reminders can be
based on date or the outdoor temperature.
• Selectable for Residential and Light Commercial
Applications
One thermostat does it all to meet the needs of Resi-
dential and Light Commercial applications. Simply
select Residential or Commercial during the installer
setup. If Commercial is selected, the thermostat will use
commercial language, meet building codes and offer
365 day holiday scheduling.
To Next Page
Need help?
General
