Honeywell TUXWIFIS User Manual

2
Audio Icons and Descriptions
Name
Icon
Description
AUDIO Press to access the Audio Player
DISCOVER
DENON
Press to discover all the compatible Denon speakers on the same network as the Tuxedo.
Add Manually add a device to the device list.
NOTE:
• This option is used to add a device to a static network.
• Requires the IP address of the HEOS device, which can be found in the HEOS app
under Settings > My Device > Advanced.
Edit Press to edit a manually added audio device
Delete All Remove all audio devices
HEOS
LOGIN
Access the HEOS LOGIN screen.
Audio Log
Displays a list of commands the Audio Player has initiated.
CONFIGURING THE HEOS DEVICE VIA THE HEOS APP
1. Download the app from the Google™ Play or iTunes® App Store on your smart device.
2. Follow the instructions provided within HEOS product to discover a device.
3. Assign the device(s) to a “Room”.
4. Create your HEOS account and log in, then sign in.
CONFIGURING THE TUXEDO FOR HEOS CONTROL
Press MULTIMEDIA > AUDIO to access the “Tuxedo Audio Player.”
1. Press SETUP, accessing the “Audio Management” screen and the table below is displayed.
2. Press DISCOVER DENON (NOTE: Must complete before logging into the HEOS Account.)
3. Press HEOS LOGIN.
4. Enter the Username and Password for your HEOS account, then press SIGN IN. Once signed in, the message
displayed will say “User Signed into their HEOS account.”
NOTE: failure to sign in to your HEOS account results in the inability to stream music from the audio device(s).
5. Press BACK until “Tuxedo Audio Player” page is displayed.
Audio Device Name
Mac Addr
IP Addr
Model
Model No
ACT- Office
7923eeXXXXXX
192.168.1.149
HEOS 3
DWS-3000…
ACT- Living Room
A6e3f2XXXXXX
192.168.1.148
HEOS 3
DWS-3000…
Device 3…. through 8
NOTE: if the “Model No” displays an “NA” than the device was manually added.
MANUALLY ADDING A DENON DEVICE WITH MODEL NO. & IP ADDRESS
Press Setup > Add > enter the NAME > enter the IP ADDRESS > select the MODEL number > SAVE.
NOTES:
• The “Model No” and “Mac Addr” columns will not populate, instead it displays an N/A.
• If the Discover Denon command does not find the device, the device has not been configured in the app.
• Once configured in the app, the Tuxedo populates the data based on the IP address (i.e. The rooms it is assigned to).
SELECTING THE MUSIC SOURCE
From the Tuxedo Audio Player, press MUSIC and select a supported music source (listed below).
NOTES:
• The Tuxedo must be logged in to the users HEOS account.
• Stations that require a login must be configured before the Tuxedo will stream audio. A sign in message is displayed
if not properly configured.

Honeywell TUXWIFIS Specifications

General

Brand	Honeywell
Model	TUXWIFIS
Category	Security System
Language	English