EXTRA
BELT
EXTRA
PAPER
Dimension TM Upright
The Dimension" Upright series of cleaners was
first introduced in mid-1994 as replacements for
Legacy models. Fig. 1.
All models were introduced initially with:
97
1 Fig. 2
Fig, 3
Fig. 6
Fig. 5 l_ POSITION#5
Oo_ ,,.%_;0°_
l ,_ ZOR POSITION R
I _ OFVALVE-_ !
=='_'-_ I GATE/F "--_
•. ,- - AGITATOR
II •
VALVE GATE IN CAVITY VALVE GATE IN
CARPET HEIGHT CLEANING TOOLS
POSITION
Fig. 7
ON/OFF
CORO SW,TCN
_) HOOK CONTROL
TYPE Z
SAG
Libel. 1 ,AG
EXTENSION
WAND
;_ CARPE'f MOTOR
ADJU BELT
AGITATOR
,, Molded, integral handle grips
• On/Off switch on the front of the upper handle
• Two brush agitator (Replaceable Roll Sleeve)
• Extra bag and belt storage on the unit Fig. 2
• One 12v headlight
• Hard bag enclosure
• One speed motor
• Stair cleaning handle
• Four position carpet height adjustment Fig. 3
• Top tool conversion
• Triple stretch hose
• Tool storage on the front of the unit
• One molded extension wand
• Type Z mlcrofiltratlen throw away bags
Some models have a "check bag" indicator on the
outside of the bag door. Fig, 4
The cleaning tool hose attaches to the cleaner
through the top of the hood and CAN stay attached
at all times.
When using cleaning tools, the nozzle control must
be in the #5 cleaning tools position. Fig, 5
With the nozzle control inthe number 5 position, a
valve gate in the main body closes and blocks all air
flow from the agitator cavity therefore diverting it to
the hose.
Set on carpet, positions 1-4, the gate valve is
opened allowing air to flow from the agitator cavity
to the motor. Fig, 6
To ensure maximum efficiency in the 4 floor cleaning
positions .b_o_Lb_hose ends must be firmly connected
to the cleaner base and tool rack Fig, 7 or the hose
removed completely and the tool door closed.
Refer to the Hoover Service Manual for repair proce
dures and the Microfiche Parts Catalog - light brown
header - for spare parts.
To Next Page
Need help?
General
