7
Filling the water tanks
WARNING:
To avoid the risk of personal
injury - Turn off, unplug, and allow to cool
before servicing or filling water tank. Do not
use hot or boiling water to fill water tanks.
IMPORTANT: DO NOT ADD SOLUTION
TO THE MAIN WATER TANK.
NOTE: When the tank is turned upright it may
allow a few drops to drip from cap. This is
normal.
NOTE: We recommend only using distilled water
if you live in an area with hard water deposits.
1.
Press the Main Water
Tank release buttons and
pull the water tank to
remove.
6.
Twist the Supplemental
Water Tank cap counter
clockwise and lift to
remove.
5.
To remove the Supple-
mental Water Tank press
both release buttons and
pull to release.
2.
Pull the tab on the Main
Water Tank cap to open.
7.
Pour water to the water
fill line. See tank fill line
for reference.
3.
Fill the Main Water Tank
with water only to fill line,
replace the cap and push
firmly to close.
8.
Replace the Supplemental
Water Tank cap and twist
clockwise to close.
4.
Slide the Main Water Tank
back into the machine
until it clicks into place.
9.
Insert the Supplemental
Water Tank back into the
machine until it clicks
into place.
To Next Page
Need help?
General
