Hotpoint HTWP1400FWW User Manual

HTWP1400F– Hotpoint
®
3.5 DOE cu. ft. capacity washer
Specification Created 2/13
460157
Washer Dimensions (in inches)
36
25-1/2
42
51
Side View
27
Rear View
36
42
27
2
3-1/2
2-1/2
25-1/2*
Side View
Rear View
8-1/2
25-3/4
23-1/2
11-1/2
*24-1/2" from the edge of the side panel to the front.
25-1/2" from front to edge of endcaps.
Washer/Dryers SC QSart
Circuit Requirements: An individual, properly-grounded branch circuit,
with a three-prong grounding-type receptacle, protected by a 15 or
20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 115V, 60Hz, 10 Amps
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Washer Note: Washer wall outlet must be located within 36" of
service cord entry. Wall outlet must not be located behind dryer.
Listed by
Underwriters
Laboratories

Hotpoint HTWP1400FWW Specifications

General

Brand	Hotpoint
Model	HTWP1400FWW
Category	Washer
Language	English