HP 14 User Manual

3. Remove the WLAN module by pulling the module away from the slot at an angle (3).
NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective
sleeves must be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
Component replacement procedures 53

HP 14 Specifications

General

Type	Original
Ink type	Pigment-based ink
Compatibility	-
Printing colors	Black
Print technology	Inkjet printing
Quantity per pack	1 pc(s)
Cartridge capacity	High (XL) Yield
Storage temperature (T-T)	0 - 60 °C
Operating temperature (T-T)	15 - 35 °C

Weight and Dimensions

Package type	Box
Package weight	58.9 g