HP 2310t User Manual

Table 4-3 OSD Menu (continued)
Icon Main Menu Submenu Description
Sleep Timer Provides the timer adjustment menu options:
●
Set Current Time—sets the current time in
hours and minutes
●
Set Sleep Time—sets the time you want to
place the monitor in sleep mode
●
Set on Time—sets the time you want the
monitor to wake up from sleep mode
●
Timer—sets the Sleep Timer feature On or Off.
The default setting is Off.
●
Sleep Now—immediately sets the monitor to
enter sleep mode
Language Selects the language in which the OSD menu is
displayed. The factory default is English.
Information Selects and displays important information about the
monitor.
Current Settings Provides the current input video mode.
Recommended
Settings
Provides the recommended resolution mode and
refresh rate for the monitor.
Serial Number Reports the serial number of the monitor. The serial
number is needed if contacting HP technical support.
FW Version Reports the firmware version of the monitor.
Backlight Hours Reports the total hours of backlight operation.
Service Support
http://www.hp.com/support
Factory Reset Returns all OSD menu settings and DDC/CI controls
to the factory default settings, except the Language.
Source Control Selects the video input signal. DVI is the factory
default.
DVI Selects DVI as the video input signal.
HDMI (2310t models
only)
Selects HDMI as the video input signal.
VGA (2310ti models
only)
Selects VGA as the video input signal.
Default Source Selects the default or primary video input signal
when the monitor is connected to two active and
valid video sources. The monitor will automatically
determine the video format. The choices are:
●
DVI
●
HDMI (2310t models only)
●
VGA (2310ti models only)
The factory default is DVI.
ENWW Adjusting the Monitor Settings 25

HP 2310t Specifications

General

Brand	HP
Model	2310t
Category	Touchscreen
Language	English