HP 27 Series User Manual

Step
Figure
Description
Remove
the Base
ASSY.
The model using
the curved surface
screen; There
must be put soft
mat above of the
work station and
don't push hard on
the machine to
avoid cause
screen to crack.
Remove the
screws to remove
the stand-base
assy.
Remove
the rear
cover
Use disassembly
tool to open all the
latches along the
edge of the Rear
Cover
Remove
the pins
and the
tape
Remove the pins
and tape

HP 27 Series Specifications

General

Screen Size	27 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	IPS
Aspect Ratio	16:9
Brightness	250 nits
Contrast Ratio	1000:1
Response Time	5 ms
Ports	HDMI, VGA
Viewing Angle	178° horizontal / 178° vertical
VESA Mount	100 x 100 mm
Dimensions (with stand)	24.1 x 18.3 x 7.3 inches