HP 8656 Series User Manual

specifications
REMOTE PROGRAZMMING
GENERAL
Interface: HP-IB (Hewlett-Packard's implementation
of IEEE Standard 488 land the identical ANSI
Standard MC1.1).
Interface Functions Implemented: SHO, AH1, TO,
L2, SRO, RL1, PPO, DC1, DTO, GO, El.
Functions Controlled: All functions controlled from
the front panel with the exception of DISPLAY,
DISPLAY in conjunction with SEQ, display
Amplitude Offset, Backspace, COARSE TUNE,
FINE TUNE, and display HP-IB ADRS are
programmable with the same accuracy and
resolution as in local operation.
Operating Temperature Range: 0 to +55"C.
Storage Temperature Range: -40 to +71"C.
Leakage: Conducted and radiated interference is
within the requirements of RE02 of MIL STD
461B and FTZ 1115. Furthermore, RF leakage of
less than 1.0 pV is induced in a two-turn loop, 2.5
cm in diameter, held 2.5 cm away from the front
surface.
Save/Recall/Ekquence Storage Registers:
100 non-volatile registers are available to save
front panel settings.
Power Requirements: 100 or 120 or 220 or 240 valts
(+5%, -10%) from 48 to 440 Hz; 125 VA maximum.
Weight: Net 18.1 kg (40 lb); shipping 23.6 kg (52 lb).
Dimensions: 133H x 425W x 520D mm
(5.25 x 16.75 x 20.5 inches.)
AP System I1 module size: 5 1/4H x 1MW x 17 D.
Absolute level accuracy includes allowances for detector linearity, temperature. flatness, attenuator accuracy and measurement
uncertainty.
AM depth is further limited by Indicator Accuracy specification.
FM depth is further limited by Indicator Accuracy ~~cations.
' FM distortion only applies for deviations up to 25 kHz for 123.6 < fc <247 MHz, and 50 kHz for 247 < fc <494 MHz. Typical
total FM distortion (harmonic and non-harmonic) is less than 1.5% for all specified deviations and external rates from dc to
100 kHz.
Typicaliy e 0.5% THD for peak deviations > I kHz and at normal rates.

HP 8656 Series Specifications

General

Brand	HP
Model	8656 Series
Category	Portable Generator
Language	English