HP Advanced Docking Station User Manual

Removal and Replacement Procedures
Maintenance and Service Guide 5–5
To install the cable lock:
1. Loop the cable around a stationary object.
2. Turn the docking station upside down, and then remove the
three PM2.5x5 screws from the cable lock bezel 1.
3. Remove the bezel from the docking station 2, and
then remove the bezel blank from the cable lock bezel 3.
Removing the Cable Lock Bezel and Bezel Blank

HP Advanced Docking Station Specifications

General

Brand	HP
Model	Advanced Docking Station
Category	Docking Station
Language	English