VSF-Member 7
Num | State | Failures | Location
-------+-------------+----------+----------
Sys-1 | Fan OK | 0 | Chassis
Sys-2 | Fan OK | 0 | Chassis
0 / 2 Fans in Failure State
0 / 2 Fans have been in Failure State
VSF-Member 8
Num | State | Failures | Location
-------+-------------+----------+----------
Sys-1 | Fan OK | 0 | Chassis
0 / 1 Fans in Failure State
0 / 1 Fans have been in Failure State
show system chassislocate
Syntax
show system chassislocate [vsf member <MEMBER-ID>]
Description
Show locator LED information. If VSF is enabled, this shows locator LED information for all the VSF members.
Parameters
<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range of 1 to 8.
Example output
switch(config)# show system chassislocate
Locator LED Status
VSF Current Time
Member State Remaining Configuration
------ ------- --------- -------------
1 off
2 off
3 off
4 off
5 off
6 off
7 off
8 off
show system power-supply
Description
Show chassis power supply information. If VSF is enabled, this shows power supply information for all the VSF
members.
Example output
switch# show system power-supply
Power Supply Status:
684 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
To Next Page
Loading...
Need help?
General