HP Intelligent Series User Manual

Intelligent Racks All HP Intelligent Series Racks are industry standard EIA-310 19 inch RETMA and will support all HP rack
mountable equipment as well as third-party equipment designed to mount in 19-inch wide racks
Intelligent Network Racks HP Intelligent Network Racks are designed for dense network equipment. These racks have the front
vertical rails moved back 75mm to facilitate front to rear cabling and have additional bristle covered cable
pass through slots in the front and on top of the racks to prevent mixing of hot and cold air. These racks
are available in standard 600mm and 800mm widths. The 800mm wide HP Intelligent Network Racks
include slotted vertical cable channels on both sides in the rear of the rack.
Intelligent Air Duct Racks HP Intelligent Air Duct Racks work with the HP Rack Air Duct Kit to direct hot exhaust air from the rear of
the rack to air returns in the ceiling. These racks are perfect for racks up to 14kW where the mixing of hot
and cold air in the datacenter needs to be eliminated to improve efficiency without the cost of additional
fans.
EIA The HP Intelligent Series Rack conforms to EIA-310D Type A cabinet per section 4.1.1
UL/CES Certification Yes
WEEE Yes
RoHS compliant Yes
Innovative
Breakthroughs
OPEX saving as HP has 81% total open area on HP rack front doors. More than anyone in the
industry
Up to 3000 lbs of dynamic loading
Compatible with HP Location Discovery Services
QuickSpecs
HP Intelligent Series Rack
Standard Features
DA - 14223 North America — Version 9 — December 9, 2013 Page 4

HP Intelligent Series Specifications

General

Brand	HP
Model	Intelligent Series
Category	Racks & Stands
Language	English