Do you have a question about the HP L2208w and is the answer not in the manual?
Plug and Play | Yes |
---|---|
Tilt angle range | -5 - 25 ° |
Cable lock slot type | Kensington |
Panel mounting interface | 100 x 100 mm |
Pixel pitch | 0.282 x 0.282 mm |
Display diagonal | 22 \ |
Display resolution | 1680 x 1050 pixels |
Vertical scan range | 50 - 76 Hz |
Horizontal scan range | 24 - 83 kHz |
Contrast ratio (typical) | 1000:1 |
Viewing angle, horizontal | 160 ° |
Display brightness (typical) | 300 cd/m² |
Certification | TCO’03, ISO 13406-2 VDT Guidelines Approval, MPR-II Compliant, CISPR Requirements, VCCI Approvals, MIC (Korean) Requirements, CSA, Australian ACA Approval, “GS” Mark, TUV Approvals, CE Marking, FCC Approval, ENERGY STAR qualified, PC-2001 Certified, Microsoft Windows Certification (Microsoft Windows 98, Microsoft Windows 2000, Microsoft Windows XP, and Windows Vista) |
Country of origin | China |
Market positioning | - |
Storage temperature (T-T) | 20 - 60 °C |
Operating temperature (T-T) | 5 - 35 °C |
Storage relative humidity (H-H) | 5 - 95 % |
Operating relative humidity (H-H) | 20 - 80 % |
Power requirements | 100 - 240 VAC, 50 - 60 Hz |
Power consumption (standby) | 2 W |
Power consumption (typical) | 50 W |
DVI-I ports quantity | 0 |
Depth (with stand) | 192 mm |
---|---|
Width (with stand) | 514 mm |
Height (with stand) | 414 mm |
Depth (without stand) | 60 mm |
Height (without stand) | 345 mm |
Weight (without stand) | 5400 g |