The MSM410 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g/n
product. The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
MSM410 Access Point Quickstart
This Quickstart shows you how to get started using the MSM410 Access Point (US J9426A/B, WW J9427A/B).
After reading this Quickstart, you can visit www.hp.com/go/procurve/manuals and download documents of particular interest such as the MSM3xx / MSM4xx
Access Points Management and Configuration Guide and the MSM7xx Controllers Management and Configuration Guide.
Hardware overview
Package contents
MSM410, documentation, mounting bracket, two mounting screws (4 mm x 25 mm (5/32 x
1 inch)) with wall anchors, and two T-bar clips with four nuts (only provided with rev B:
US J9426B and WW J9427B).
Ports
• Ethernet port: Auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45 connector.
The port supports Power over Ethernet (PoE) 802.3af.
• Console port: Standard console (serial) port with an RJ-45 connector. For details, see
Console Ports in the MSM3xx / MSM4xx Access Points Management and Configuration
Guide.
Warning: Never connect the Console port to an Ethernet switch or PoE power source.
This may damage the MSM410. Connect it only to other serial ports via an
RJ-45 to DB-9 adapter.
To Next Page
Need help?
General
