To Next Page

To Previous Page

4. Removal and replacement procedures

Adherence to these procedures and precautions is essential for proper service.

Preparation for disassembly

Use this information to properly prepare to disassemble and reassemble the monitor.

1) Read the “Important safety information” and “Important service information and precautions”

sections in the “Getting started” chapter of this guide.

2) Clean the room for disassembly.

3) Identify the disassembly area.

4) Check the position that the monitors are to be placed along with the number of monitors. Prepare

the area for material flow according to the disassembly layout.

5) Be sure to have the following equipment and materials:

 Press fixture

 Working table

 Screwdriver

 Knife

 Gloves

 Cleaning cloth

 ESD protection

 Scraper bar in the following dimensions:

Questions and Answers:

Need help?

Do you have a question about the HP OMEN 27i and is the answer not in the manual?

HP OMEN 27i Specifications

General

Screen Size	27 inches
Resolution	2560 x 1440 (QHD)
Panel Type	IPS
Contrast Ratio	1000:1
Color Gamut	98% DCI-P3
HDR	HDR 400
VESA Mount	100 x 100 mm
Tilt	-5° to +20°
Height Adjustment	130 mm
Refresh Rate	165 Hz
Response Time	1 ms
Adaptive Sync	NVIDIA G-SYNC Compatible
Brightness	350 nits
Ports	1 x DisplayPort 1.2, 1 x HDMI 2.0, 2 x USB 3.0, 1 x Audio Out
Weight (with stand)	7.7 kg