To Next Page

To Previous Page

3. Remove the three screws from the back of the monitor that connect the monitor panel to the

pedestal base (1) and slide the pedestal base from the monitor panel (2).

Figure 2-7 Removing the Pedestal Base

4. To attach the monitor to a swing arm (sold separately), insert four 10mm screws through the

holes on the swing arm plate and into the mounting holes on the monitor.

CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To

attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long

screws are required. Longer screws must not be used because they may damage the monitor. It

is important to verify that the manufacturer’s mounting solution is compliant with the VESA

standard and is rated to support the weight of the monitor display panel. For best performance, it

is important to use the power and video cables provided with the monitor.

Figure 2-8 Installing the Monitor on a Swing Arm (sold separately)

To attach the monitor to other mounting fixtures, follow the instructions included with the

mounting fixture to ensure that the monitor is safely attached.

5. Reconnect the cables to the monitor panel.

8 Chapter 2 Setting Up the Monitor

Other manuals for HP ProDisplay P19A

Questions and Answers:

Need help?

Do you have a question about the HP ProDisplay P19A and is the answer not in the manual?

General

3D	No
HD type	SXGA
Panel type	TN
Pixel pitch	0.294 x 0.294 mm
Display diagonal	19 \
Display resolution	1280 x 1024 pixels
Display technology	LED
Native aspect ratio	5:4
Vertical scan range	50 - 76 Hz
Horizontal scan range	30 - 83 kHz
Viewable size, vertical	301 mm
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	1000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	376.3 mm
Viewing angle, horizontal	170 °
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 960
On/off switch	Yes
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	25 W
Power consumption (standby)	0.5 W
Power consumption (typical)	1 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Sustainability certificates	EPEAT Gold, ENERGY STAR
Product color	Black
Country of origin	China
Market positioning	-
HDMI ports quantity	0
Tilt angle range	-5 - 25 °
Number of OSD languages	10
On Screen Display (OSD) languages	CHI (SIMPL), CHI (TR), DEU, DUT, ENG, ESP, FRE, ITA, JPN, POR

Weight and Dimensions