HP ProLiant DL360 G7 User Manual

Hardware options installation 49
2.
Back up all server data on the hard drive.
3. Remove the hard drive.
Installing a SAS hard drive
1. Remove the hard drive blank ("Removing hard drive blanks" on page 47).
2. Prepare the hard drive.
3. Install the hard drive.
4. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations.
DVD-ROM and DVD-RW drive option
This server supports the installation of a DVD-ROM drive or a DVD-RW drive. When an optical drive is
installed, the server does not support the additional hard drive backplane.

HP ProLiant DL360 G7 Specifications

General

Storage	Up to 8 SFF SAS/SATA/SSD drives
Form Factor	1U Rack
Processor	Intel Xeon 5600 series
Memory	Up to 192GB DDR3
Network	Embedded NC382i Dual Port Multifunction Gigabit Server Adapter
Power Supply	Hot-plug redundant power supplies (460W, 750W, or 1200W)
Expansion Slots	2 x PCIe Gen2
RAID Controller	HP Smart Array P410i
Network Controller	HP NC382i Dual Port Multifunction Gigabit Server Adapter
Management	Integrated Lights-Out 3 (iLO 3)
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware