3. If you enabled DHCPv4 or DHCPv6 time settings, clear the appropriate check box.
4. Edit the setting(s) as necessary. Click Apply.
Editing User Administration
• User Accounts—Displays available users.
User Name—Appears in the user list on the User Administration page and on the iLO
Overview page. It does not have to be the same as the Login Name. The maximum length
for a user name is 39 characters. The user name must use printable characters.
◦
◦ Login Name—Is the name that you must use when logging in to iLO. The maximum length
for a login name is 39 characters. The login name must use printable characters.
IMPORTANT: The Login Name cannot be modified, once it is set.
• Privileges—Select from the following permissions:
Administer User Accounts—Enables a user to add, edit, and delete local iLO user accounts.
A user with this privilege can change privileges for all users. If you do not have this
privilege, you can view your own settings and change your own password.
◦
◦ Configure iLO Settings—Enables a user to configure most iLO settings, including security
settings, and to remotely update the iLO firmware. This privilege does not enable local
user account administration.
◦ Remote Console Access—Enables a user to remotely access the host system Remote
Console, including video, keyboard, and mouse control.
◦ Virtual Media —Enables a user to use the Virtual Media feature on the host system.
◦ Virtual Power and Reset—Enables a user to power-cycle or reset the host system. These
activities interrupt the system availability. A user with this privilege can diagnose the
system by using the button.
To add a new user:
64 Performing maintenance
To Next Page
Loading...
Need help?
General