*406918-001*
About this document
This document provides procedures for installing an HP ProLiant
ML310 G3 1TB Data Protection Storage Server (DP Storage Server).
HP assumes that you are qualified in servicing computer equipment,
and trained in recognizing hazards in products with hazardous
energy levels.
Regulatory notice
The rating label on the device gives the class (A or B) of the
equipment. Class B devices have an FCC logo or ID on the label.
Class A devices do not have an FCC logo or ID on the label. After you
have determined the device class, see the HP ProLiant Data Protection
Storage Server user guide for complete regulatory compliance notices.
This guide is printed, and also provided in the product kit as a file on
the documentation CD.
Kit contents
Included in your DP Storage Server kit are the following:
• HP ProLiant ML310 G3 1TB DP Storage Server (Microsoft
®
System
Center Data Protection Manager (DPM) software and operating
system preloaded)
• Power cord
• Documentation CD—Contains administration guide, user guide,
and these installation instructions.
• Quick Restore DVD
• Service Release DVD
• Safety and Disposal Documentation CD
•
HP ProLiant Data Protection Storage Server user guide
• ProLiant Essentials Integrated Lights-Out Advanced Pack
• End user license agreements
NOTE: A keyboard and mouse are not included with the DP
Storage Server.
Operating system
The HP ProLiant ML310 G3 DP Storage Server is preloaded with the
Windows
®
Storage Server 2003 operating system. Prior to power up,
deployment instructions found in the HP ProLiant Data Protection
Storage Server user guide should be followed to enable the successful
configuration of the storage server.
Installing a DP Storage Server (tower)
Follow the steps in this section to set up a tower model server.
WARNING! To reduce the risk of electric shock, fire, or damage
to the equipment, do not plug telephone or telecommunications
connectors into RJ-45 connectors.
1. Connect network cable and any peripheral devices to the server.
2. Connect the power cord to the back of the server.
3. Connect the power cord to the AC power source.
4. See the DP Storage Server startup chapter in the HP ProLiant Data
Protection Storage Server user guide.
WARNING! To reduce the risk of personal injury or damage to
the equipment:
• Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
• Plug the power cord into a grounded (earthed) electrical outlet that
is easily accessible at all times.
• Unplug the power cord from the power supply to disconnect power
to the equipment.
• Do not route the power cord where it can be walked on or pinched
by items placed against it. Pay particular attention to the plug,
electrical outlet, and the point where the cord extends from the
server.
Callouts
Front panel
1 Media bays (bezel blanks)
2 CD-ROM drive ejector button
3 Power on/Standby button
4 Power on/Standby LED
5 Hard drive activity LED
6 NIC link/activity LED
7 Internal system health LED
8 Hard drive bays
9 USB connectors (2)
10 Bezel lock
11 CD-ROM drive indicator LED
12 CD-ROM drive
Rear panel
1 Power cord connector
2 Mouse connector
3 Keyboard connector
4 Serial connector
5 Video connector
6 USB connectors (2)
7 RJ-45 Ethernet connector
8 RJ-45 connector (iLO)
9 Parallel connector
Registering the server
To register your product, visit the HP Registration web site at:
http://register.hp.com
Additional information
The HP ProLiant Servers Troubleshooting Guide provides simple
procedures for resolving common problems as well as a
comprehensive course of action for fault isolation and identification,
error message interpretation, issue resolution, and software
maintenance. Keep in mind that some information may not apply to a
DP Storage Server.
To obtain the guide, refer to one of the sources below, and then select
the HP ProLiant Servers Troubleshooting Guide.
• The Business Support Center on the HP web site
http://www.hp.com/support
You can find the guide by using the navigation features on the web
site.
• The Technical Documentation web site
http://www.docs.hp.com
Select Enterprise Servers, Workstations and Systems Hardware,
and then the appropriate server.
HP ProLiant ML310
l0040
1
2
3
4
5
6
7
8
9
10
11
12
gl0041
1
2
3
4
5
7
6
8
9
HP ProLiant ML310 G3 1TB
Data Protection Storage Server
installation instructions
© Copyright 2005 Hewlett-Packard Development Company, L.P.
Windows® is a U.S. registered trademark of Microsoft Corporation.
First edition December 2005
Product names mentioned herein may be trademarks of their respective
companies as reflected by an associated footnote.
The information in this document is subject to change without notice.
www.hp.com
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
Important Safety Information