To Next Page

To Previous Page

6. Conﬁgure the Network Interface Information for both NICs. Click

Next to continue.

7. Conﬁgure the System Information. Click Next to continue.

8. Verify that the information is correct when the conﬁguration review

window is displayed (see Figure 2).

Figure 2 Rapid Startup conﬁguration review window

9. Click Finish to exit Rapid Startup. If a reboot is required, Rapid

Startup displays a message that a reboot is occurring and that the

conﬁguration information will be set.

The browser returns to the status window. The refresh can take several

minutesifthedevicewasrestarted.

NOTE:

After the Rap id Startup Wizard is complete, the Welcome

window becomes the default page.

Completing the system conﬁguration

The basic conﬁguration for the HP ProLiant Storage Server is complete at

this point, however, some computing environments can require additional

settings and conﬁguration.

HPProLiantStorageServeruserguide

Other manuals for HP ProLiant ML350 G4p

Questions and Answers:

Need help?

Do you have a question about the HP ProLiant ML350 G4p and is the answer not in the manual?

General

Server type	Tower
Processor	Intel Xeon
RAM	Up to 16 GB DDR2
Drive Bays	6 x Hot-Plug Drive Bays
Network Interface	Integrated Gigabit Ethernet
Expansion Slots	6
Power Supply	Redundant
Operating System Support	Windows Server, Linux
Processor Cores	Single-Core / Dual-Core
RAID Support	Integrated RAID controller
Form Factor	5U Tower