HP RP2 2000 Installation Instructions

Online Technical Support
For the online access to technical support information, self-solve tools,
online assistance, community forums or IT experts, broad multivendor
knowledge base, monitoring and diagnostic tools, go to
http://www.hp.com/support
.
Documentation Feedback
HP is committed to providing documentation that meets your needs. To
help us improve the documentation, please send any suggestions,
comments, or errors to doc.feedback@hp.com. Include the document
title and part number (located near the barcode) when submitting your
feedback.
HP RP7 Retail System Model 7100
NOTE: Inserting the screws is a
required step.
NOTE: This step may not be necessary if
the security screw is already loosened.
NOTE: Tightening the security screw
is optional.
CAUTION: You must rotate antenna
brackets up to remove front panel.
HP RP2 Retail System Models 2000 and 2030
NOTE: Inserting the screws is a
required step.
NOTE: This step may not be necessary
if a connector cover is not installed in
the USB port.
NOTE: This step may not be necessary
if a connector cover is not installed in
the USB port.

HP RP2 2000 Specifications

General

Brand	HP
Model	RP2 2000
Category	Touchscreen
Language	English