HP v220 User Manual

Item Description Notes
Quantity of
items
included in
product
including liquids, semi-liquids (gel/paste) and toner
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing refractory
ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components and
materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 SCREW DRIVER(PHILLIPS HEAD)
#1
Description #2 SCREW DRIVER(WAHSER HEAD)
#2
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment
including the required steps to remove the external enclosure:
1. Remove cable from Display head
2. Remove Stand Base From Display Head
3. Remove Rear Cover From Display Head
4. Remove Acetate Tape and EMI From Display Head
5. Remove LED Cable ,Interface Cabel and Osd Cable From Display Head
6. Remove Bracket Assy From Display Head
7. Remove Panel Assy From Display Head
8. Remove Interface BD and Power BD From Bracket Assy
9. Remove Base and Rubber From Stand ASSY
10. Rmove Hinge From Stand Assy
11. Rmove Wall Mount From Rear Cover
12. Disassemble Panel Assy

HP v220 Specifications

General

Brand	HP
Model	v220
Category	Monitor
Language	English