To Next Page

To Previous Page

Before repairing connectors, follow these steps:

▲ Prepare the monitor for disassembly. See Preparation for disassembly on page 10

IMPORTANT:

• Repair Condition: Connector repair is only for out of warranty.

• Repairing must operate by professional repairers (Note) in repair center, not applicable for end

user.

• Electrostatic protection is required when component replacement is required.

• The monitor meets ROHS, please use Lead-free solder wire for soldering.

• If Connector need to replace, must check specification and part number whether match the BOM

and location.

• If connector need to replace, please insert new parts carefully because the near pin may cause

short circuit by inappropriate operate.

• DO NOT allow any liquid on the board. Water and moisture may cause short-circuit to the

electronic components and lead to malfunctions.

• The fusion point of Lead-Free solder is requested. Repairing with conventional lead wire may

cause damage.

• Work quickly to avoid overheating the circuit board as soon as you confirm the steady soldering

condition.

• Keep the soldering iron tip clean and well tinned and when replacing parts.

• A close inspection of the circuit board revealed look in good condition.

• After repaired, must connect source to each port to check Main board function is ordinary.

Note: (The requirement of professional repairers’ regulation by ERP lot5)

1) The professional repairer has the technical competence to repair electronic displays and complies

MAIN BOARD

Questions and Answers:

Need help?

Do you have a question about the HP X32C and is the answer not in the manual?

HP X32C Specifications

General

Panel type	VA
Color depth	8 bit
Color gamut	97 %
Pixel pitch	0.3637 x 0.3637 mm
Pixel density	70 ppi
Backlight type	Edge LED
Display diagonal	31.5 \
Surface hardness	3H
Anti-glare screen	Yes
Native aspect ratio	16:9
Screen curvature rating	1500R
Contrast ratio (typical)	3000:1
Display diagonal (metric)	80 cm
Digital vertical frequency	60 - 165 Hz
Digital horizontal frequency	30 - 210 kHz
Display brightness (typical)	350 cd/m²
Supported graphics resolutions	640 x 480 (VGA), 720 x 400, 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 900, 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080)
DisplayPort version	1.4
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	50 W
Power consumption (standby)	0.5 W
Power consumption (typical)	25 W
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	20 - 80 %
Package depth	234.9 mm
Package height	553.7 mm
Package weight	13400 g
Cables included	AC, DisplayPort
Tilt angle range	-5 - 20 °
Height adjustment	100 mm
Product color	Black
Market positioning	Gaming
HP segment	Home
AMD FreeSync type	FreeSync Premium
Depth	94.7 mm
Height	425.5 mm

Weight and Dimensions