HP XP P9500 Operation Guide

zVM (VM/ESA) Cache operations
When the storage system is managed under VM/ESA, the following SET CACHE commands are
effective across multiple SSIDs:
• SET CACHE SUBSYSTEM ON|OFF
• SET NVS SUBSYSTEM ON|OFF
• SET CACHEFW SUBSYSTEM ON|OFF
• DESTAGE SUBSYSTEM
zVSE (VSE/ESA) Cache operations
When using VSE/ESA to manage the storage system, the following CACHE commands are effective
across multiple SSIDs:
• CACHE SUBSYS=cuu,ON|OFF|STATUS
• CACHE SUBSYS=cuu,FAST,ON|OFF
• CACHE SUBSYS=cuu,NVS,ON|OFF
• CACHE SUBSYS=cuu,REINIT
NOTE: SIMs indicating a drive failure may not be reported to the VSE/ESA console. Because
the RAID technology and dynamic spare drives ensure non-stop processing, a drive failure may
not be noticed by the console operator. If C-Track is not installed, the user should run and read an
EREP SIM report on a regular basis. Because all SIMs are also logged on the SVP, the user can
also use the Remote Web Console to monitor the SIMs.
32 Mainframe operations

HP XP P9500 Specifications

General

Brand	HP
Model	XP P9500
Category	Software
Language	English