1. Display the Main Menu panel and choose 1 Set Defaults.
The Set Defaults panel to specify various default values is displayed.
2. Specify CONFIG01 in Configuration File Prefix and DADP in Local Device Address Domain ID.
3. Press the F3=Exit key.
You are returned to the Main Menu panel.
4. Choose 3 Discover/Define Configuration.
The Discover/Define Configuration panel is displayed.
5. Choose 1 Discover HP Storage.
The Discover HP Storage Arrays panel is displayed. In the initial status, a list of storage systems
is not displayed because devices have not yet been scanned.
6. Press the F4=Discover key.
The Scan Device Address Extent panel is displayed.
7. Specify / for Device Num or Volser to set the local scan target, and specify the scan range
in Start and End.
436 Using the ISPF panels
To Next Page
Loading...
Need help?
General